Info: 'Moving Partitions… This may take a while and CANNOT be interrupted!'
2:
Bounds: x1=40, y1=60, x2=300, y2=75
Type: -128
Info: ''
3:
Bounds: x1=20, y1=90, x2=141, y2=106
Type: -120
Info: 'Currently Moving:'
4:
Bounds: x1=160, y1=90, x2=320, y2=106
Type: -120
Info: ''
5:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ∏'
DITL_3000_Configure Drive.txt
Items: (3 entries)
0:
Bounds: x1=12, y1=10, x2=44, y2=42
Type: -96
Info: ' Ä'
1:
Bounds: x1=59, y1=10, x2=336, y2=60
Type: -120
Info: '^0'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ∏'
DITL_2001_Standard File.txt
Items: (11 entries)
0:
Bounds: x1=256, y1=138, x2=336, y2=156
Type: 4
Info: 'Open'
1:
Bounds: x1=59, y1=1152, x2=77, y2=1232
Type: 4
Info: ''
2:
Bounds: x1=256, y1=163, x2=336, y2=181
Type: 4
Info: 'Cancel'
3:
Bounds: x1=232, y1=39, x2=347, y2=59
Type: -128
Info: ''
4:
Bounds: x1=256, y1=68, x2=336, y2=86
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=93, x2=336, y2=111
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=39, x2=230, y2=185
Type: 0
Info: ''
7:
Bounds: x1=229, y1=39, x2=246, y2=185
Type: 0
Info: ''
8:
Bounds: x1=252, y1=124, x2=340, y2=125
Type: -128
Info: ''
9:
Bounds: x1=20, y1=1044, x2=116, y2=1145
Type: -120
Info: ''
10:
Bounds: x1=65, y1=195, x2=334, y2=211
Type: -120
Info: 'Where is "Utility Help? - I Dunno...'
DITL_2000_Help Window.txt
Items: (7 entries)
0:
Bounds: x1=380, y1=270, x2=450, y2=290
Type: 4
Info: 'Done'
1:
Bounds: x1=130, y1=270, x2=330, y2=286
Type: 7
Info: ' '
2:
Bounds: x1=40, y1=270, x2=90, y2=285
Type: 8
Info: ' '
3:
Bounds: x1=15, y1=35, x2=475, y2=255
Type: 0
Info: ''
4:
Bounds: x1=136, y1=10, x2=323, y2=28
Type: 8
Info: 'This is no longer supported.'
5:
Bounds: x1=376, y1=266, x2=454, y2=294
Type: 0
Info: ''
6:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' –'
DITL_1700_Part Select.txt
Items: (10 entries)
0:
Bounds: x1=230, y1=190, x2=290, y2=210
Type: 4
Info: 'OK'
1:
Bounds: x1=340, y1=190, x2=400, y2=210
Type: 4
Info: 'Cancel'
2:
Bounds: x1=270, y1=20, x2=422, y2=86
Type: -120
Info: 'Select partition type and adjust its size as needed.(1 Megabyte = 1024 K)'
3:
Bounds: x1=20, y1=20, x2=195, y2=212
Type: 0
Info: ''
4:
Bounds: x1=322, y1=100, x2=404, y2=117
Type: 8
Info: ''
5:
Bounds: x1=322, y1=122, x2=393, y2=136
Type: 16
Info: ''
6:
Bounds: x1=322, y1=142, x2=405, y2=158
Type: 8
Info: ''
7:
Bounds: x1=230, y1=100, x2=320, y2=116
Type: -120
Info: 'Minimum (K)'
8:
Bounds: x1=230, y1=141, x2=320, y2=158
Type: -120
Info: 'Maximum (K)'
9:
Bounds: x1=230, y1=20, x2=262, y2=52
Type: -96
Info: ' '
DITL_1600_Partition Info.txt
Items: (4 entries)
0:
Bounds: x1=310, y1=250, x2=370, y2=270
Type: 4
Info: 'OK'
1:
Bounds: x1=10, y1=26, x2=428, y2=229
Type: 0
Info: ''
2:
Bounds: x1=10, y1=5, x2=428, y2=21
Type: -120
Info: 'Detailed information about all partitions.'
3:
Bounds: x1=306, y1=246, x2=374, y2=274
Type: -128
Info: ''
DITL_1401_Resize.txt
Items: (13 entries)
0:
Bounds: x1=200, y1=175, x2=265, y2=195
Type: 4
Info: 'Cancel'
1:
Bounds: x1=65, y1=175, x2=130, y2=195
Type: 4
Info: 'Re-Size'
2:
Bounds: x1=55, y1=10, x2=307, y2=77
Type: -120
Info: 'Enter below the size you would like your partition to be. Please observe the minimum and maximum limits.(1 Megabyte = 1024 K)'
3:
Bounds: x1=65, y1=145, x2=135, y2=161
Type: -120
Info: 'Max Size:'
4:
Bounds: x1=65, y1=85, x2=135, y2=101
Type: -120
Info: 'Min Size:'
5:
Bounds: x1=175, y1=145, x2=250, y2=161
Type: -120
Info: ''
6:
Bounds: x1=175, y1=85, x2=250, y2=101
Type: -120
Info: ''
7:
Bounds: x1=65, y1=115, x2=135, y2=131
Type: -120
Info: 'New Size:'
8:
Bounds: x1=175, y1=115, x2=250, y2=131
Type: 16
Info: ''
9:
Bounds: x1=10, y1=20, x2=42, y2=52
Type: -96
Info: ' '
10:
Bounds: x1=255, y1=85, x2=275, y2=101
Type: -120
Info: 'K'
11:
Bounds: x1=255, y1=115, x2=275, y2=131
Type: -120
Info: 'K'
12:
Bounds: x1=255, y1=145, x2=275, y2=161
Type: -120
Info: 'K'
DITL_1400_Part Custom.txt
Items: (11 entries)
0:
Bounds: x1=340, y1=240, x2=440, y2=260
Type: 4
Info: 'DONE'
1:
Bounds: x1=295, y1=10, x2=480, y2=159
Type: -128
Info: ''
2:
Bounds: x1=105, y1=10, x2=280, y2=267
Type: 0
Info: ''
3:
Bounds: x1=10, y1=10, x2=70, y2=267
Type: 0
Info: ''
4:
Bounds: x1=80, y1=10, x2=96, y2=267
Type: 0
Info: ''
5:
Bounds: x1=340, y1=205, x2=440, y2=225
Type: 4
Info: 'Delete'
6:
Bounds: x1=310, y1=35, x2=464, y2=149
Type: -120
Info: 'Click mouse in grey region and drag to set size. If no free/grey space exists you must delete or shrink a partition to create room for the new one.'
7:
Bounds: x1=300, y1=170, x2=380, y2=190
Type: 4
Info: 'Password'
8:
Bounds: x1=320, y1=15, x2=455, y2=31
Type: -120
Info: 'TO ADD A PARTITION :'
9:
Bounds: x1=400, y1=170, x2=475, y2=190
Type: 4
Info: 'Resize'
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' x'
DITL_1202_Welcome MONO.txt
Items: (8 entries)
0:
Bounds: x1=62, y1=9, x2=290, y2=95
Type: -64
Info: 'Ë'
1:
Bounds: x1=1246, y1=26, x2=1394, y2=90
Type: -120
Info: '1095 N. Main St M-1Orange, CA 92667714/289-8543714/289-8543 (Fax)'
2:
Bounds: x1=98, y1=150, x2=303, y2=166
Type: -120
Info: ''
3:
Bounds: x1=98, y1=170, x2=303, y2=186
Type: -120
Info: ''
4:
Bounds: x1=18, y1=96, x2=334, y2=112
Type: -120
Info: 'Lido 7 - Copyright1992~94, Surf City Software'
5:
Bounds: x1=98, y1=130, x2=247, y2=146
Type: -120
Info: 'This copy belongs to:'
6:
Bounds: x1=34, y1=120, x2=319, y2=195
Type: -128
Info: ''
7:
Bounds: x1=48, y1=130, x2=80, y2=162
Type: -96
Info: ' '
DITL_1201_New User.txt
Items: (9 entries)
0:
Bounds: x1=123, y1=178, x2=181, y2=198
Type: 4
Info: 'OK'
1:
Bounds: x1=25, y1=15, x2=57, y2=47
Type: -96
Info: ' '
2:
Bounds: x1=65, y1=15, x2=278, y2=50
Type: -120
Info: 'Please personalize your copy of Lido 7...'
3:
Bounds: x1=30, y1=70, x2=195, y2=86
Type: -120
Info: 'Enter your name below:'
4:
Bounds: x1=30, y1=95, x2=250, y2=111
Type: 16
Info: 'Your name here'
5:
Bounds: x1=30, y1=120, x2=260, y2=136
Type: -120
Info: 'Enter your company name below:'
6:
Bounds: x1=30, y1=145, x2=250, y2=161
Type: 16
Info: 'Your company name here'
7:
Bounds: x1=119, y1=174, x2=185, y2=202
Type: -128
Info: ''
8:
Bounds: x1=15, y1=5, x2=288, y2=60
Type: -128
Info: ''
DITL_1200.txt
Items: (9 entries)
0:
Bounds: x1=13, y1=13, x2=126, y2=128
Type: -64
Info: ' Ä'
1:
Bounds: x1=1246, y1=7, x2=1394, y2=71
Type: -120
Info: '1095 N. Main St M-1Orange, CA 92667714/289-8543714/289-8543 (Fax)'
Info: 'Black/Blue areas represent allocation blocks which are currently being used. White areas represent unused allocation blocks. Any gray area represents unused space in the Volume's Bit Map.'
3:
Bounds: x1=310, y1=20, x2=444, y2=35
Type: -120
Info: 'VOLUME USAGE MAP'
4:
Bounds: x1=326, y1=216, x2=424, y2=244
Type: -128
Info: ''
5:
Bounds: x1=280, y1=180, x2=430, y2=196
Type: -120
Info: 'Magnification factor:'
6:
Bounds: x1=435, y1=180, x2=470, y2=196
Type: -120
Info: ''
DITL_1100_Volume Info.txt
Items: (22 entries)
0:
Bounds: x1=390, y1=190, x2=455, y2=210
Type: 4
Info: 'Done'
1:
Bounds: x1=290, y1=50, x2=445, y2=178
Type: 0
Info: ''
2:
Bounds: x1=10, y1=40, x2=187, y2=55
Type: -120
Info: 'First Block Of Vol Bit Map:'
3:
Bounds: x1=10, y1=80, x2=165, y2=95
Type: -120
Info: '# of Allocation Blocks:'
4:
Bounds: x1=10, y1=100, x2=160, y2=115
Type: -120
Info: 'Allocation Block Size:'
5:
Bounds: x1=10, y1=60, x2=166, y2=75
Type: -120
Info: 'First Block In Bit Map:'
6:
Bounds: x1=10, y1=180, x2=160, y2=195
Type: -120
Info: '# of Files on Volume:'
7:
Bounds: x1=10, y1=120, x2=198, y2=135
Type: -120
Info: '# of Free Allocation Blocks:'
8:
Bounds: x1=70, y1=10, x2=216, y2=26
Type: -120
Info: 'Volume Information:'
9:
Bounds: x1=60, y1=150, x2=183, y2=167
Type: -120
Info: 'File Information:'
10:
Bounds: x1=10, y1=200, x2=175, y2=215
Type: -120
Info: '# of Folders on Volume:'
11:
Bounds: x1=210, y1=40, x2=280, y2=55
Type: -120
Info: ''
12:
Bounds: x1=210, y1=60, x2=280, y2=75
Type: -120
Info: ''
13:
Bounds: x1=210, y1=80, x2=280, y2=95
Type: -120
Info: ''
14:
Bounds: x1=210, y1=100, x2=280, y2=115
Type: -120
Info: ''
15:
Bounds: x1=210, y1=120, x2=280, y2=135
Type: -120
Info: ''
16:
Bounds: x1=210, y1=180, x2=280, y2=195
Type: -120
Info: ''
17:
Bounds: x1=210, y1=200, x2=280, y2=215
Type: -120
Info: ''
18:
Bounds: x1=300, y1=10, x2=455, y2=44
Type: -120
Info: 'Click on a Volume to get its information.'
19:
Bounds: x1=290, y1=190, x2=365, y2=210
Type: 4
Info: 'Show Map'
20:
Bounds: x1=386, y1=186, x2=459, y2=214
Type: -128
Info: ''
21:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' L'
DITL_999_Stop Alert.txt
Items: (3 entries)
0:
Bounds: x1=223, y1=92, x2=283, y2=112
Type: 4
Info: 'OK'
1:
Bounds: x1=71, y1=7, x2=332, y2=86
Type: 8
Info: '^0'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Á'
DITL_998_Caution 2 Alert.txt
Items: (6 entries)
0:
Bounds: x1=100, y1=85, x2=160, y2=105
Type: 4
Info: 'OK'
1:
Bounds: x1=215, y1=85, x2=275, y2=105
Type: 4
Info: 'Cancel'
2:
Bounds: x1=55, y1=10, x2=320, y2=75
Type: -120
Info: ''
3:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
4:
Bounds: x1=96, y1=81, x2=164, y2=109
Type: 0
Info: ''
5:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ê'
DITL_996_Caution Alert.txt
Items: (3 entries)
0:
Bounds: x1=215, y1=93, x2=275, y2=113
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=7, x2=337, y2=86
Type: 8
Info: '^0'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ‰'
DITL_995_Note Alert.txt
Items: (3 entries)
0:
Bounds: x1=227, y1=93, x2=287, y2=113
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=6, x2=339, y2=85
Type: 8
Info: '^0'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' „'
DITL_994_Custom Choice.txt
Items: (6 entries)
0:
Bounds: x1=200, y1=95, x2=300, y2=115
Type: 4
Info: 'Initialize…'
1:
Bounds: x1=30, y1=95, x2=120, y2=115
Type: 4
Info: 'Custom…'
2:
Bounds: x1=65, y1=15, x2=317, y2=67
Type: -120
Info: 'Partitioning was successful! Would you like to initialize your Mac volume now or make custom modifications?'
3:
Bounds: x1=15, y1=15, x2=47, y2=47
Type: -96
Info: ' '
4:
Bounds: x1=196, y1=91, x2=304, y2=119
Type: 0
Info: ''
5:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ê'
DITL_800_DRIVER FLAGS.txt
Items: (12 entries)
0:
Bounds: x1=198, y1=205, x2=283, y2=225
Type: 4
Info: 'Cancel'
1:
Bounds: x1=57, y1=205, x2=137, y2=225
Type: 4
Info: 'OK'
2:
Bounds: x1=32, y1=23, x2=302, y2=41
Type: 6
Info: 'Removable'
3:
Bounds: x1=32, y1=80, x2=302, y2=98
Type: 6
Info: 'BlReads/BlWrite +(BlReads/BlWrite)'
4:
Bounds: x1=32, y1=99, x2=302, y2=117
Type: 6
Info: 'BlReads/BlWrite +(BlReads/NBWrite)'
5:
Bounds: x1=32, y1=118, x2=302, y2=136
Type: 6
Info: 'BlReads/BlWrite +(NBReads/NBWrite)'
6:
Bounds: x1=32, y1=137, x2=302, y2=155
Type: 6
Info: 'BlReads/NBWrite +(BlReads/NBWrite)'
7:
Bounds: x1=32, y1=156, x2=302, y2=174
Type: 6
Info: 'BlReads/NBWrite +(NBReads/NBWrite)'
8:
Bounds: x1=32, y1=175, x2=302, y2=193
Type: 6
Info: 'NBReads/NBWrite +(NBReads/NBWrite)'
9:
Bounds: x1=32, y1=42, x2=302, y2=60
Type: 6
Info: 'Magneto Optical'
10:
Bounds: x1=32, y1=61, x2=302, y2=79
Type: 6
Info: 'Floptical'
11:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' '
DITL_752_Write Verification.txt
Items: (8 entries)
0:
Bounds: x1=210, y1=190, x2=268, y2=210
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=190, x2=128, y2=210
Type: 4
Info: 'Cancel'
2:
Bounds: x1=206, y1=186, x2=272, y2=214
Type: -128
Info: ''
3:
Bounds: x1=50, y1=135, x2=300, y2=155
Type: 6
Info: 'Write Only'
4:
Bounds: x1=50, y1=155, x2=300, y2=175
Type: 6
Info: 'Write with Verification'
5:
Bounds: x1=10, y1=9, x2=42, y2=41
Type: -96
Info: ' '
6:
Bounds: x1=50, y1=10, x2=310, y2=130
Type: -128
Info: ''
7:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ô'
DITL_751_Write Verification.txt
Items: (9 entries)
0:
Bounds: x1=210, y1=205, x2=268, y2=225
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=205, x2=138, y2=225
Type: 4
Info: 'Cancel'
2:
Bounds: x1=206, y1=201, x2=272, y2=229
Type: -128
Info: ''
3:
Bounds: x1=45, y1=125, x2=295, y2=145
Type: 6
Info: 'Write Only'
4:
Bounds: x1=45, y1=145, x2=295, y2=165
Type: 6
Info: 'Write with Drive Verification'
5:
Bounds: x1=45, y1=165, x2=295, y2=185
Type: 6
Info: 'Write with Computer Verification'
6:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
7:
Bounds: x1=50, y1=10, x2=310, y2=110
Type: -128
Info: ''
8:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ô'
DITL_750_Driver Cache.txt
Items: (11 entries)
0:
Bounds: x1=75, y1=180, x2=145, y2=200
Type: 4
Info: 'Cancel'
1:
Bounds: x1=245, y1=180, x2=315, y2=200
Type: 4
Info: 'OK'
2:
Bounds: x1=20, y1=30, x2=351, y2=97
Type: 8
Info: 'Enter the size of the cache in Kbytes you would like the driver to use with the currently selected hard disk. You may choose values from 0 to 64. Mac Plus users will be limited to 32.'
3:
Bounds: x1=50, y1=120, x2=200, y2=135
Type: -120
Info: 'Current Cache Size:'
4:
Bounds: x1=50, y1=150, x2=200, y2=165
Type: -120
Info: 'Selected Cache Size:'
5:
Bounds: x1=260, y1=120, x2=310, y2=135
Type: 8
Info: ''
6:
Bounds: x1=260, y1=150, x2=310, y2=165
Type: 16
Info: ''
7:
Bounds: x1=10, y1=19, x2=362, y2=107
Type: -128
Info: ''
8:
Bounds: x1=140, y1=13, x2=236, y2=30
Type: -120
Info: ' DRIVER CACHE'
9:
Bounds: x1=71, y1=176, x2=149, y2=204
Type: -128
Info: ''
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ó'
DITL_703_R_W TEST.Direct_NuBus.txt
Items: (15 entries)
0:
Bounds: x1=70, y1=260, x2=137, y2=280
Type: 4
Info: 'Start'
1:
Bounds: x1=230, y1=260, x2=299, y2=281
Type: 4
Info: 'Exit'
2:
Bounds: x1=30, y1=20, x2=335, y2=105
Type: -120
Info: 'This test will take from 30 seconds to a few minutes and will use direct SCSI calls. Data transfer rate is measured in Kilobytes per Second. Elapsed time is critical so while test is in progress do not touch anything!!'
3:
Bounds: x1=30, y1=200, x2=167, y2=218
Type: -120
Info: 'Read Transfer Rate:'
4:
Bounds: x1=210, y1=200, x2=330, y2=215
Type: 8
Info: ''
5:
Bounds: x1=20, y1=10, x2=350, y2=115
Type: -128
Info: ''
6:
Bounds: x1=30, y1=230, x2=168, y2=247
Type: -120
Info: 'Write Transfer Rate:'
7:
Bounds: x1=210, y1=230, x2=330, y2=245
Type: 8
Info: ''
8:
Bounds: x1=50, y1=120, x2=155, y2=155
Type: 5
Info: 'Allow Readdisconnect'
9:
Bounds: x1=210, y1=120, x2=310, y2=157
Type: 5
Info: 'Allow WriteDisconnect'
10:
Bounds: x1=130, y1=2, x2=242, y2=17
Type: -120
Info: ' Direct SCSI Test'
11:
Bounds: x1=260, y1=165, x2=295, y2=180
Type: 16
Info: '256'
12:
Bounds: x1=30, y1=165, x2=235, y2=183
Type: 8
Info: 'Transfer Size: (10 ≤ x ≤ 256)'
13:
Bounds: x1=66, y1=256, x2=141, y2=284
Type: -128
Info: ''
14:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ø'
DITL_702_R_W TEST.Driver.txt
Items: (16 entries)
0:
Bounds: x1=39, y1=204, x2=106, y2=224
Type: 4
Info: 'Start'
1:
Bounds: x1=160, y1=205, x2=229, y2=226
Type: 4
Info: 'Exit'
2:
Bounds: x1=70, y1=40, x2=234, y2=130
Type: -128
Info: ''
3:
Bounds: x1=290, y1=145, x2=427, y2=163
Type: -120
Info: 'Read Transfer Rate:'
4:
Bounds: x1=300, y1=165, x2=420, y2=180
Type: 8
Info: ''
5:
Bounds: x1=275, y1=35, x2=433, y2=131
Type: -128
Info: ''
6:
Bounds: x1=290, y1=190, x2=428, y2=207
Type: -120
Info: 'Write Transfer Rate:'
7:
Bounds: x1=300, y1=210, x2=420, y2=225
Type: 8
Info: ''
8:
Bounds: x1=90, y1=10, x2=174, y2=25
Type: 8
Info: ' Driver Test'
9:
Bounds: x1=170, y1=160, x2=205, y2=175
Type: 16
Info: '256'
10:
Bounds: x1=55, y1=150, x2=149, y2=184
Type: 8
Info: 'Transfer Size: (10 ≤ x ≤ 256)'
11:
Bounds: x1=35, y1=200, x2=110, y2=228
Type: -128
Info: ''
12:
Bounds: x1=30, y1=40, x2=62, y2=72
Type: -96
Info: ' '
13:
Bounds: x1=20, y1=30, x2=250, y2=140
Type: -128
Info: ''
14:
Bounds: x1=295, y1=10, x2=420, y2=26
Type: -120
Info: 'Select a Volume:'
15:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' æ'
DITL_701_SEEK TEST.txt
Items: (9 entries)
0:
Bounds: x1=60, y1=190, x2=127, y2=210
Type: 4
Info: 'Start'
1:
Bounds: x1=210, y1=190, x2=279, y2=211
Type: 4
Info: 'Exit'
2:
Bounds: x1=30, y1=20, x2=320, y2=122
Type: -120
Info: 'This test will take from 5 to 30 minutes. The average seek time is calculated by simulating 10,000 random seeks. Seek time is measured in milliseconds. Elapsed time is critical so while test is in progress do not touch anything!!'
3:
Bounds: x1=30, y1=150, x2=167, y2=168
Type: -120
Info: 'AVERAGE SEEK TIME:'
4:
Bounds: x1=200, y1=150, x2=298, y2=169
Type: -120
Info: ''
5:
Bounds: x1=20, y1=10, x2=330, y2=127
Type: -128
Info: ''
6:
Bounds: x1=138, y1=4, x2=213, y2=20
Type: -120
Info: ' Seek Test '
7:
Bounds: x1=56, y1=186, x2=131, y2=214
Type: 0
Info: ''
8:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ω'
DITL_700_R_W TEST.Direct.txt
Items: (15 entries)
0:
Bounds: x1=70, y1=260, x2=137, y2=280
Type: 4
Info: 'Start'
1:
Bounds: x1=230, y1=260, x2=299, y2=281
Type: 4
Info: 'Exit'
2:
Bounds: x1=30, y1=20, x2=335, y2=105
Type: -120
Info: 'This test will take from 30 seconds to a few minutes and will use direct SCSI calls. Data transfer rate is measured in Kilobytes per Second. Elapsed time is critical so while test is in progress do not touch anything!!'
3:
Bounds: x1=30, y1=200, x2=167, y2=218
Type: -120
Info: 'Read Transfer Rate:'
4:
Bounds: x1=210, y1=200, x2=330, y2=215
Type: 8
Info: ''
5:
Bounds: x1=20, y1=10, x2=350, y2=115
Type: -128
Info: ''
6:
Bounds: x1=30, y1=230, x2=168, y2=247
Type: -120
Info: 'Write Transfer Rate:'
7:
Bounds: x1=210, y1=230, x2=330, y2=245
Type: 8
Info: ''
8:
Bounds: x1=40, y1=130, x2=168, y2=149
Type: 5
Info: 'Use Blind Reads'
9:
Bounds: x1=210, y1=130, x2=338, y2=149
Type: 5
Info: 'Use Blind Writes'
10:
Bounds: x1=130, y1=2, x2=242, y2=17
Type: -120
Info: ' Direct SCSI Test'
11:
Bounds: x1=260, y1=160, x2=295, y2=175
Type: 16
Info: '256'
12:
Bounds: x1=30, y1=160, x2=235, y2=178
Type: 8
Info: 'Transfer Size: (10 ≤ x ≤ 256)'
13:
Bounds: x1=66, y1=256, x2=141, y2=284
Type: -128
Info: ''
14:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' º'
DITL_602.txt
Items: (6 entries)
0:
Bounds: x1=237, y1=193, x2=305, y2=213
Type: 4
Info: 'Cancel'
1:
Bounds: x1=147, y1=193, x2=215, y2=213
Type: 4
Info: 'Non - AV'
2:
Bounds: x1=232, y1=189, x2=310, y2=217
Type: -128
Info: ''
3:
Bounds: x1=10, y1=9, x2=42, y2=41
Type: -96
Info: ' '
4:
Bounds: x1=50, y1=10, x2=309, y2=175
Type: -128
Info: ''
5:
Bounds: x1=57, y1=193, x2=125, y2=213
Type: 4
Info: 'AV Setup'
DITL_601_JazSleepDialog.txt
Items: (9 entries)
0:
Bounds: x1=225, y1=175, x2=295, y2=195
Type: 4
Info: 'Cancel'
1:
Bounds: x1=80, y1=175, x2=150, y2=195
Type: 4
Info: 'Set Sleep'
2:
Bounds: x1=21, y1=25, x2=339, y2=91
Type: -120
Info: 'You may change the sleep timer on your IOMEGA Jaz Drive. If you remove power from the Jaz drive, this timer will be reset to the factory default of 30 minutes.'
3:
Bounds: x1=80, y1=110, x2=184, y2=126
Type: -120
Info: 'Current Value:'
4:
Bounds: x1=80, y1=135, x2=165, y2=151
Type: -120
Info: 'New Value:'
5:
Bounds: x1=205, y1=110, x2=260, y2=125
Type: -120
Info: ''
6:
Bounds: x1=205, y1=135, x2=260, y2=150
Type: 16
Info: ''
7:
Bounds: x1=10, y1=15, x2=350, y2=100
Type: -128
Info: ''
8:
Bounds: x1=100, y1=8, x2=261, y2=25
Type: -120
Info: 'IOMEGA Jaz Sleep Timer'
DITL_600_Start Manager.txt
Items: (10 entries)
0:
Bounds: x1=225, y1=175, x2=295, y2=195
Type: 4
Info: 'Cancel'
1:
Bounds: x1=80, y1=175, x2=150, y2=195
Type: 7
Info: ' '
2:
Bounds: x1=20, y1=25, x2=338, y2=91
Type: -120
Info: 'This dialog will let you set the amount of time in seconds your mac will wait for a hard disk at SCSI ID "0" to become ready. You may select values from 1 to 31 seconds (the default is 15).'
3:
Bounds: x1=80, y1=110, x2=184, y2=126
Type: -120
Info: 'Current Value:'
4:
Bounds: x1=80, y1=135, x2=165, y2=151
Type: -120
Info: 'New Value:'
5:
Bounds: x1=205, y1=110, x2=260, y2=125
Type: -120
Info: ''
6:
Bounds: x1=205, y1=135, x2=260, y2=150
Type: 16
Info: ''
7:
Bounds: x1=10, y1=15, x2=350, y2=100
Type: -128
Info: ''
8:
Bounds: x1=129, y1=8, x2=232, y2=24
Type: -120
Info: 'START UP DELAY'
9:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' X'
DITL_500_Main Window.txt
Items: (25 entries)
0:
Bounds: x1=345, y1=75, x2=425, y2=95
Type: 4
Info: 'Scan Bus'
1:
Bounds: x1=55, y1=250, x2=325, y2=282
Type: 0
Info: ''
2:
Bounds: x1=55, y1=215, x2=325, y2=247
Type: 0
Info: ''
3:
Bounds: x1=55, y1=180, x2=325, y2=212
Type: 0
Info: ''
4:
Bounds: x1=55, y1=145, x2=325, y2=177
Type: 0
Info: ''
5:
Bounds: x1=55, y1=110, x2=325, y2=142
Type: 0
Info: ''
6:
Bounds: x1=55, y1=75, x2=325, y2=107
Type: 0
Info: ''
7:
Bounds: x1=55, y1=40, x2=325, y2=72
Type: 0
Info: ''
8:
Bounds: x1=55, y1=5, x2=325, y2=37
Type: 0
Info: ''
9:
Bounds: x1=10, y1=250, x2=42, y2=282
Type: 32
Info: ' »'
10:
Bounds: x1=10, y1=215, x2=42, y2=247
Type: 32
Info: ' …'
11:
Bounds: x1=10, y1=180, x2=42, y2=212
Type: 32
Info: ' '
12:
Bounds: x1=10, y1=145, x2=42, y2=177
Type: 32
Info: ' À'
13:
Bounds: x1=10, y1=110, x2=42, y2=142
Type: 32
Info: ' Ã'
14:
Bounds: x1=10, y1=75, x2=42, y2=107
Type: 32
Info: ' Õ'
15:
Bounds: x1=10, y1=40, x2=42, y2=72
Type: 32
Info: ' Œ'
16:
Bounds: x1=10, y1=5, x2=42, y2=37
Type: 32
Info: ' œ'
17:
Bounds: x1=1345, y1=90, x2=1425, y2=110
Type: 4
Info: 'Help'
18:
Bounds: x1=345, y1=99, x2=425, y2=119
Type: 4
Info: 'Bus Status'
19:
Bounds: x1=345, y1=145, x2=425, y2=165
Type: 4
Info: 'Easy Setup'
20:
Bounds: x1=345, y1=169, x2=425, y2=189
Type: 4
Info: 'Format'
21:
Bounds: x1=345, y1=216, x2=425, y2=236
Type: 4
Info: 'Update'
22:
Bounds: x1=345, y1=240, x2=425, y2=260
Type: 4
Info: 'Mount'
23:
Bounds: x1=349, y1=6, x2=421, y2=44
Type: 64
Info: '<'
24:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' Ù'
DITL_450_Volume Icons.txt
Items: (30 entries)
0:
Bounds: x1=304, y1=264, x2=369, y2=284
Type: 4
Info: 'Exit'
1:
Bounds: x1=115, y1=265, x2=195, y2=285
Type: 4
Info: 'Install'
2:
Bounds: x1=20, y1=90, x2=52, y2=122
Type: 32
Info: '-'
3:
Bounds: x1=70, y1=90, x2=102, y2=122
Type: 32
Info: '.'
4:
Bounds: x1=120, y1=90, x2=152, y2=122
Type: 32
Info: '/'
5:
Bounds: x1=170, y1=90, x2=202, y2=122
Type: 32
Info: '0'
6:
Bounds: x1=220, y1=90, x2=252, y2=122
Type: 32
Info: '1'
7:
Bounds: x1=20, y1=130, x2=52, y2=162
Type: 32
Info: '2'
8:
Bounds: x1=70, y1=130, x2=102, y2=162
Type: 32
Info: '3'
9:
Bounds: x1=120, y1=130, x2=152, y2=162
Type: 32
Info: '4'
10:
Bounds: x1=170, y1=130, x2=202, y2=162
Type: 32
Info: '5'
11:
Bounds: x1=220, y1=130, x2=252, y2=162
Type: 32
Info: '6'
12:
Bounds: x1=20, y1=170, x2=52, y2=202
Type: 32
Info: '7'
13:
Bounds: x1=70, y1=170, x2=102, y2=202
Type: 32
Info: '8'
14:
Bounds: x1=120, y1=170, x2=152, y2=202
Type: 32
Info: '9'
15:
Bounds: x1=170, y1=170, x2=202, y2=202
Type: 32
Info: ':'
16:
Bounds: x1=220, y1=170, x2=252, y2=202
Type: 32
Info: ';'
17:
Bounds: x1=20, y1=210, x2=52, y2=242
Type: 32
Info: '<'
18:
Bounds: x1=70, y1=210, x2=102, y2=242
Type: 32
Info: '='
19:
Bounds: x1=120, y1=210, x2=152, y2=242
Type: 32
Info: '>'
20:
Bounds: x1=170, y1=210, x2=202, y2=242
Type: 32
Info: '?'
21:
Bounds: x1=220, y1=210, x2=252, y2=242
Type: 32
Info: '@'
22:
Bounds: x1=285, y1=210, x2=337, y2=241
Type: -120
Info: 'Current Icon:'
23:
Bounds: x1=365, y1=210, x2=397, y2=242
Type: -128
Info: ''
24:
Bounds: x1=275, y1=85, x2=403, y2=197
Type: -128
Info: ''
25:
Bounds: x1=45, y1=10, x2=77, y2=42
Type: -96
Info: ' '
26:
Bounds: x1=100, y1=10, x2=381, y2=75
Type: -120
Info: 'TO INSTALL A SYSTEM 7 ICON:1) Select a Volume in the list to the right,2) Click on desired icon to the left,3) Click the "Install" Button.'
27:
Bounds: x1=20, y1=5, x2=429, y2=80
Type: -128
Info: ''
28:
Bounds: x1=300, y1=260, x2=373, y2=288
Type: -128
Info: ''
29:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' ¬'
DITL_405_Select Icon.txt
Items: (25 entries)
0:
Bounds: x1=20, y1=60, x2=52, y2=92
Type: 32
Info: '-'
1:
Bounds: x1=80, y1=60, x2=112, y2=92
Type: 32
Info: '.'
2:
Bounds: x1=140, y1=60, x2=172, y2=92
Type: 32
Info: '/'
3:
Bounds: x1=200, y1=60, x2=232, y2=92
Type: 32
Info: '0'
4:
Bounds: x1=260, y1=60, x2=292, y2=92
Type: 32
Info: '1'
5:
Bounds: x1=20, y1=105, x2=52, y2=137
Type: 32
Info: '2'
6:
Bounds: x1=80, y1=105, x2=112, y2=137
Type: 32
Info: '3'
7:
Bounds: x1=140, y1=105, x2=172, y2=137
Type: 32
Info: '4'
8:
Bounds: x1=200, y1=105, x2=232, y2=137
Type: 32
Info: '5'
9:
Bounds: x1=260, y1=105, x2=292, y2=137
Type: 32
Info: '6'
10:
Bounds: x1=20, y1=150, x2=52, y2=182
Type: 32
Info: '7'
11:
Bounds: x1=80, y1=150, x2=112, y2=182
Type: 32
Info: '8'
12:
Bounds: x1=140, y1=150, x2=172, y2=182
Type: 32
Info: '9'
13:
Bounds: x1=200, y1=150, x2=232, y2=182
Type: 32
Info: ':'
14:
Bounds: x1=260, y1=150, x2=292, y2=182
Type: 32
Info: ';'
15:
Bounds: x1=20, y1=195, x2=52, y2=227
Type: 32
Info: '<'
16:
Bounds: x1=80, y1=195, x2=112, y2=227
Type: 32
Info: '='
17:
Bounds: x1=140, y1=195, x2=172, y2=227
Type: 32
Info: '>'
18:
Bounds: x1=200, y1=195, x2=232, y2=227
Type: 32
Info: '?'
19:
Bounds: x1=260, y1=195, x2=292, y2=227
Type: 32
Info: '@'
20:
Bounds: x1=190, y1=240, x2=255, y2=260
Type: 4
Info: 'Cancel'
21:
Bounds: x1=50, y1=240, x2=115, y2=260
Type: 4
Info: 'OK'
22:
Bounds: x1=65, y1=10, x2=288, y2=27
Type: -120
Info: 'Select An Icon For Your Hard Disk.'
23:
Bounds: x1=15, y1=5, x2=300, y2=50
Type: -128
Info: ''
24:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_380_Error Recovery.txt
Items: (11 entries)
0:
Bounds: x1=191, y1=180, x2=304, y2=204
Type: 4
Info: 'Exit'
1:
Bounds: x1=18, y1=36, x2=322, y2=91
Type: -120
Info: 'For the sake of convenience, Error Recovery ‘Enabled’ means 8 retries and ECC applied. ‘Disabled’ means 0 retries and no ECC applied.'
2:
Bounds: x1=39, y1=120, x2=142, y2=155
Type: -120
Info: 'Error Recovery is currently:'
3:
Bounds: x1=49, y1=167, x2=124, y2=182
Type: 6
Info: 'Enabled'
4:
Bounds: x1=48, y1=192, x2=123, y2=207
Type: 6
Info: 'Disabled'
5:
Bounds: x1=25, y1=112, x2=155, y2=220
Type: -128
Info: ''
6:
Bounds: x1=178, y1=128, x2=322, y2=163
Type: -120
Info: '(Use Radio Buttons to change parameters)'
7:
Bounds: x1=12, y1=18, x2=329, y2=100
Type: -128
Info: ''
8:
Bounds: x1=112, y1=11, x2=226, y2=28
Type: -120
Info: ' ERROR RECOVERY '
9:
Bounds: x1=187, y1=176, x2=308, y2=208
Type: -128
Info: ''
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' |'
DITL_377_Reassign Block.txt
Items: (9 entries)
0:
Bounds: x1=245, y1=202, x2=313, y2=222
Type: 4
Info: 'Cancel'
1:
Bounds: x1=102, y1=202, x2=165, y2=222
Type: 4
Info: 'Ok'
2:
Bounds: x1=242, y1=159, x2=311, y2=172
Type: 16
Info: ''
3:
Bounds: x1=82, y1=157, x2=211, y2=174
Type: -120
Info: 'Reassign block # :'
4:
Bounds: x1=20, y1=15, x2=375, y2=95
Type: -120
Info: 'Enter bad block numbers below that have been returned by the verify test. This option is provided as a temporary solution for bad blocks. Remember, reformatting the drive is the recommended way to ‘spare out’ bad blocks.'
5:
Bounds: x1=20, y1=96, x2=375, y2=148
Type: -120
Info: 'Be aware that the new block will be blank and thus leave a hole in the file, program, etc. which owned the bad block!'
6:
Bounds: x1=12, y1=8, x2=386, y2=186
Type: -128
Info: ''
7:
Bounds: x1=241, y1=198, x2=317, y2=226
Type: -128
Info: ''
8:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' y'
DITL_375_Interleave.txt
Items: (12 entries)
0:
Bounds: x1=190, y1=170, x2=260, y2=190
Type: 4
Info: 'Cancel'
1:
Bounds: x1=50, y1=170, x2=120, y2=190
Type: 4
Info: 'OK'
2:
Bounds: x1=220, y1=140, x2=240, y2=154
Type: 16
Info: ''
3:
Bounds: x1=70, y1=140, x2=205, y2=155
Type: -120
Info: 'Default Interleave :'
4:
Bounds: x1=21, y1=20, x2=280, y2=105
Type: -120
Info: 'The default interleave factor has been set for you to provide the maximum performance for your machine and hard disk. Change this value only if you know what you are doing!'